Lifeline Safety Systems for Industrial | Fall Protection in Saudi Arabia
*Images are for illustrative purposes. Actual product appearance and specifications may vary.
Product Overview
Lifeline Safety System for Industrial Fall Protection
- Lifeline Safety systems offer overhead rigid rail fall protection for industrial, aviation, transport maintenance, logistics, and warehouse settings.
- Rigid rail systems are used where short fall arrest distance is needed and where fall clearance is minimal.
- Lifeline Safety assists safer movement of workers using a safety harness and lifeline connection during maintenance and inspection activities.
- The system can be installed parallel or perpendicular to purlins, depending on roof structure requirements and site location.
- The smooth trolley system operates on the rigid rail, allowing workers to move without repeatedly reconnecting to the system.
- The Roof Life Line system can support up to four simultaneous users, depending on configuration and site conditions.
- Lifeline Safety systems can be used indoors and outdoors, with hot-dip galvanised mild steel construction for corrosion protection.
Performance Standards & Compliance
The lifeline safety system meets international safety standards:
Lifeline Safety Requirements in Saudi Arabia
The Lifeline Safety system is intended to assist fall protection needs in industrial, aviation, transport, logistics, and rooftop maintenance settings. The system employs a rigid rail design to minimise fall distance, limit swing risks, and enhance worker movement in areas where fall clearance is minimal.
-
Anchor DevicesEN 795:2012 / CEN/TS 16415:2013Supports anchor devices to be used by one or more users simultaneously.
-
Multi-UserBS 8610:2017Supports anchor systems intended for single-user and multi-user fall protection applications.
-
Personal Fall ProtectionOSHA 29 CFR 1910.140Addresses performance, care, and use standards for personal fall protection systems.
-
Construction SafetyOSHA 29 CFR 1926.502Supports fall protection system requirements for construction-related applications.
-
GalvanisingBS EN ISO 1461 / SIC 109Offers hot-dip galvanising requirements to protect steel against corrosion.
Technical Specifications
| Product / System | Lifeline Safety System Overhead rigid rail fall arrest system |
| System Type | Rigid Rail Fall Protection For industrial, aviation, transport, and logistics use |
| Configuration | Modular Rigid Rail Parallel or perpendicular to purlins |
| Rail Layout | Straight-Line Runs Only Based on approved site layout |
| Maximum Users | Up to 4 Users Subject to configuration and site conditions |
| User Weight | 140 kg Per User Maximum user weight limit |
| Free-Fall Distance | 600 mm Maximum With correctly positioned lanyard or retractable device |
| Lanyard Offset | 30 Degrees Maximum Maximum offset from vertical |
| Service Life | Up to 25 Years With annual maintenance and standard usage |
| Primary Material | Mild Steel Used throughout the system |
| Surface Finish | Hot-Dip Galvanised To BS EN ISO 1461 / SIC 109 |
| Environment | Indoor and Outdoor Galvanised protection supports external installation |
How Lifeline Safety Systems Work for Fall Protection?
The Lifeline Safety system operates on the principle of an overhead rigid rail into which a travelling trolley is connected. The trolley rides along the rail, allowing the user to work across the covered area while continuous fall protection is provided.
- The rigid rail helps reduce fall distance and assists in minimizing impact forces during fall arrest.
- The trolley system uses closed bearings to allow smooth and easy worker movement along the rail.
- Lifeline Safety systems help minimize pendulum swing compared with flexible cable systems.
- The system supports safer access around trains, trucks, aircraft, machinery, and logistics areas.
- The Roof Life Line construction can be fixed to existing purlins or secondary steelwork.
Trustworthy Lifeline Safety in Work Areas of Industries
Lifeline Safety offers a managed overhead fall protection system for work areas where floor space should be kept clear and fall clearance is restricted. The system is particularly helpful in aviation, transport maintenance, logistics, warehousing, and manufacturing settings.
- It is intended to work around aircraft, trains, trucks, and industrial equipment.
- Rigid rail mounted on the roof helps maintain open floor areas for smooth operations.
- The system can be connected to available purlins or secondary steelwork.
- Lifeline Safety systems reduce worker fall distance and support safer movement.
Secure Your Work Areas with Lifeline Safety System Today
Get a Custom Quote — Lifeline Safety Systems in Saudi Arabia with rigid rail and safety harness protection
Enhance the protection of workers with Lifeline Safety, Roof Life Line, rigid rail, and safety harness and lifeline systems to industrial, aviation, transport maintenance, logistics, warehouse, and rooftop work areas